Tentative Norseman drill bit group buy

Signed-In Members Don't See This Ad
Status
Not open for further replies.
I would be willing to buy a couple of extra if that is what it will take to hit the mark. If you can tell us what sizes and how many more of each that are needed maybe we can all add a few to our orders.:) It would be well worth it IMHO.

Mike
 
Signed-In Members Don't See This Ad
coming in late on this one. Been away for several months due to some health issues. Seems I made it back just in time. Here's what I'll take:

25/64 - 2
15/32 - 2
37/64 - 2
27/64 - 3
1/2 - 3
7mm - 4

Thanks,
Brian McInturff
 
Okay. I'm in, too (if it's still open).

1 x 3/8"
1 x 25/64"
1 x 13/32"
1 x 27/64"
1 x 15/32"
1 x 31/64"
1 x 1/2"

1 x Size "J"
1 x Size "O"
1 x Size "S"
1 x Size "U"
1 x Size "V"

1 x 10mm
1 x 11mm
1 x 12.5mm
 
Hey guys, withoutgoing and looking up what bit sizes each pen kit uses what are the sizes used for most of the higher end kits from CraftSupply usa. Since that is where most of my kits come from I just want to make sure I don't miss any bits. And knowing this ends today I'm not sure I'll have time to go out into the shop and check(my shop is a disarray since I haven't been in it for 5 months). Any help on this would be appreciated.

I would also be willing to help out adding bits to my order if we need some to get the discount.

Thanks, Brian
 
I would say from their web site. Do not want to start a drill debate.

Emperor, Gentlemens,Stateman 37/64 and 15/32

Imperial 15/32 and 35/64

Jr Gent, State and Emperor 12.5 and 27/64

Lotus and Imperial 15/32 and 35/64

hope that is what your looking for.
 
For the Jr's they've changed it recently. It is now 12.5 and 10.5. 27/64 is sloppy and 13/32 only fits through about half the blanks drilled.

GK
 
Greg your right I forgot, I went with what they had listed on their instructions and forgot they recommended it on the accessories.

One would think they would fix that but then again.
 
If not to late I would be interested in

1 x Size "J"
1 x Size "O"
1 x Size "S"
1 x Size "U"
1 x Size "V"
7mm ... 1
8mm ... 1
10mm ... 1
10.5mm ... 1
12.5mm ... 1
 
Airrat - I would like any or all of the below depending on the price break. If I can get the price break I'll take the bit, if not, no need to order it. Just let me know.

12.5mm - 1
10.5mm - 1
7mm - 1 or 2 if it will get us to the next complete discount
8mm - 1
15/32 - 1
25/64 - 1
27/64 - 1
 
I'd like to squeeze in at the last minute.

J x 1
O x 1
V x 1
7mm x 1
10.5 x 1
12.5 x 1

I have the full set of the SAE bits and love them.
 
Tom

Will we be given enough time after the buy is closed to check your list
to see if there are any bits some of us might be willing to purchase a few more to get the 35% discount. I will do what I can to help.
 
Yeah Ron I will get totals up tomorrow and then leave see if we can get a couple more. What I was thinking is if any bits are at the totals for the discount, locking them, then locking any bits that reach the discount.

If someone still wants one of those bits at the reg price that is fine. I will work that in.


I will get the list updated tomorrow am Mountain time. At work right now and only have a few min between flights.
 
Ok this post is going to serve as the mark off point. I am going to work on finding out what sizes are close.

Other then the one person I told to edit their post in an email.

Please do not change anything. I am going off a printout and will not have the correct info after this.
 
Ok I have the list updated. I need everyone to look at it and confirm their orders are correct. I found a few errors on my part so I went through it twice and think I have it all correct with what was posted here.

<h1>I need everyone to email that what they see is correct, make sure to include your IAP name so I know who it is.</h1>

http://spreadsheets.google.com/ccc?key=pOzpu3Q5Be_gz6a2yzMwSUQ&hl=en

If you just don't want to create a google account to view it and see all the pretty numbers and hard work I did email me and I will send you an email on what I have listed.

Please do not email me yet for invoices. I still need to see if we can get a few sizes some more for another package discount. I will post that in a separate thread I think.
 
Still need a few to confirm what they want is listed correctly.
Kent4Him
Joseph10s
Penworks
GaryMGq
Jthompson1995
Texatdurango
Joeatact
RWL5420
saltwein
JimBob
Thewishman

I spent some time on the phone with the company we are doing the order with. They are looking forward to it and I will get more details from them when I can send them the order.

Also I have not posted the "what we need" list yet, I have a couple people I want to give today to place an order. I have it ready and just need to paste it in as soon as I get their wishes. Then it will be a first come first serve on those. Once we hit what is needed, anyone that wants over that will pay the single bit price. I will probably give this list till Sunday, then get everything ready on Monday.
 
Tom

It looks like you have mine correct, I will be happy to add more if it will help to get better prices when that time comes.
 
OK here it is, this list shows what we bits we need to get to the next package for 35% off.

This will be a first come first serve. Once we reach the amount needed for the next package (discount) it will be done. If enough people order to get more packages that is fine but if we go over a package size I will email that person/those people and ask if they are still interested in the single bit price.

Please post after this post and DO not edit your previous post, I will not be going back and looking at those. On Monday I am going to tally up the totals and contact Fairbury. I need to get this buy over with, it is taking up all my time.

this is sized larger to catch attention not to seem like I am losing it and yelling. :D
<h2>I will try to explain this again, Just because we are needing some more ordered for the package discount DOES not mean we are not getting a discount. For example right now the 10mm has 22 ordered. The packages are in quantities of 5, so we are getting 35% off of 20 and paying regular price on 2. If we dont reach the next pack size I am averaging out the price, we will still get a discount but not the 35%. I hope this makes sense now, if not I am not sure how to explain it better, other then to say lets order what I have listed in red </h2>

Size.... #35%off .....Totals......NEEDED for full package discount



3/32"....12......7.....5
5/32"....12......2.....10
13/64"...12......6.....6
7/32"....12......7.....5
15/64"...12......5.....7
9/32"....12......6.....6
5/16".....6......6.....we are at a full pack
21/64"....6......1.....5
11/32"....6......4.....2
23/64"....6......1.....5
3/8"......6......11....1
25/64"....6......20....4
13/32"....6......3.....3
27/64"....6......24....we are at full packs
29/64"....6......4.....2
15/32"....6......17....1
31/64"....6......10....2
1/2"......6......8.....4
33/64"....1......1....these are discounted already for single quantity
17/32"....1......1....these are discounted already
35/64"....1......3....these are discounted already
37/64"....1......11...these are discounted already


Drill
Size "J"..12.....14....10
Size "O" ..6.....18....0
Size 'P'...6.....1......5
Size "S"...6.....3.....3
Size "U"...6.....4.....2
Size "V"...6.....5.....1
Size "X"...6.....2.....4

6mm.......10.....5......5
7mm.......10....40/42.....0/over 2
8mm........5.....10....none needed
8.2mm......5.....8.....2
9mm........5.....8.....2
10mm.......5....24....1
10.5mm.....5....25...0
11mm.......5.....4.....1
12mm.......5.....2.....3
12.5mm.....5....30.....none needed


<h1>OK first come first serve lets get these all to zero and get the best rate we can. </h1>
 
Tom, I'm sure glad you are doing this, cause I haven't a clue what's happening :D

so add the following to round off your packages

7mm 1 to 3 whatever you need
10.5 I think you need 1
O If you need any
 
Signed-In Members Don't See This Ad
Status
Not open for further replies.
Back
Top Bottom