Looking for table saw blade

Signed-In Members Don't See This Ad
B

beck3906

Member
Joined
Aug 13, 2005
Messages
2,152
Location
Belton, TX 76513
I've spent a few hours looking for a specific table saw blade and not finding anything like I need/want. Maybe someone here can help
Looking for these specs.
10 inch diameter
5/8 bore
5/32 kerf
Prefer a flat bottom kerf

Thanks for any suggestions
 
Signed-In Members Don't See This Ad
Hey Rick,

I have never heard of a 5/32" kerf table saw blade. This is a full 1/32 wider than a standard full kerf blade.

All of mine are full kerf 1/8". The ones that have a flat bottom cut are the rip blades with either a Flat Top Grind or a Triple Chip Grind. Some of the combination blades will be close to a flat bottom kerf with 1 Alternate Top Bevel teeth and then one Triple Chip Grind.

All of my table saw blades are CMT brand and I got them from Taylor Toolworks (small family owned business). This link takes you right to their 10" Full Kerf blades.
 
Mortalis beat me to it. Infinity makes a couple of different carbide wide kerf blades, one 5/32" and one a full 1/4", both with flat bottom cuts, but they are only 8" blades. They were designed for making box joints and tenon shoulders. - Dave
 
Try searching for 4 mm. I found this but it's 12 inches and no idea what the arbor hole is. They have a note to contact them if you can't find the size you're looking for.
 

Attachments

  • IMG_0260.png
    IMG_0260.png
    592.8 KB · Views: 25
I suppose you can have something ordered and special made. But you do not say what you are using it for and why that size? I wish you answer these questions and maybe we can be more of a help. The only thing I thought of was a dado blade and here is one that has what you want but is a 8" blade. You probably can get a single replacement blade as opposed to buying the whole set. Just a suggestion.

https://infinitytools.com/products/...ick-kerf-flat-top-saw-blade-package-5-8-arbor
 
beck3906 said:
I've spent a few hours looking for a specific table saw blade and not finding anything like I need/want. Maybe someone here can help
Looking for these specs.
10 inch diameter
5/8 bore
5/32 kerf
Prefer a flat bottom kerf

Thanks for any suggestions
Click to expand...
Rick, Woodpeckers has a new series Ultra-Shear flat top grooving 10" x 40 tooth table saw blades in 1/8", 3/16", and 1/4". I bought a 1/8" blade to be used for creating Kumiko project materials. Here's the link to their site.
www.woodpeck.com

Ultra-Shear 10" 40-Tooth Flat Top Grooving Saw Blades

When you need flawless, flat-bottomed cuts for dadoes, box joints, or splines, you won't find more qualified blades than Ultra-Shear's 10" 40-Tooth Flat Top Grooving Blades. Our new 3/16" and 1/4" kerf blades open the door to more finger joint options, faster drawer bottom grooves and perfectly...
www.woodpeck.com www.woodpeck.com

Gregg
 
You must log in or register to reply here.
Back
Top Bottom