gtriever
Member
Several months ago, I purchased Rockler's Dust Right Lathe System . It worked pretty well with a full-sized pen mandrel, but with TBC it was way too large. So, a little pine, a tee nut and bolt, a U-bolt, and a 1-7/8 Vacuum nozzle later:
![Chip-Deflector1_web.jpg Chip-Deflector1_web.jpg](https://www.penturners.org/data/attachments/154/154927-9991a11a216f07a9924384cf6c39f76c.jpg)
It collects a lot of the chips, and 99% of the shavings/ribbons/dust... :biggrin:
![Vacuum-Nozzle-1_web.jpg Vacuum-Nozzle-1_web.jpg](https://www.penturners.org/data/attachments/154/154928-75dd35a18ab9b990c3074bac40007d5c.jpg)
![Chip-Deflector1_web.jpg Chip-Deflector1_web.jpg](https://www.penturners.org/data/attachments/154/154927-9991a11a216f07a9924384cf6c39f76c.jpg)
It collects a lot of the chips, and 99% of the shavings/ribbons/dust... :biggrin: