Watch Part Blank

[Edward Po]

Hi:

Anyone have any ideas what the best way to remove those tiny shaft attached to the gear.

Thanks

 

[bruce119]

just drill a small hole say about 1/16" though a piece of 3/4" wood blank lay the gear on the wood with the shaft in the hole and give it a tap, it will pop rite out...I had several pieces all different sizes....

 

[Jim Burr]

I use a Dremel with a sanding drum, hold with a pair of hemostats

 

[Janster]

..place it on a course file and just push it with your fingers.
POP!! Done!

 

[firewhatfire]

I didn't ask the question, but thanks to all who answered it.

good info

 

[Edward Po]

Thanks guys, I will try all the suggested methods