Jet 1236 Parts fit a HF 34706 Lathe?

[BradTheNailer]

Does anyone one know if the Jet spindle pulleys will fit the HF 347046. They look like the exact same lathe, even the inner workings look the same.

The pulleys on the HF lathe are junk (DUH!). Before they come apart I'd like to get some replacements on hand.
I could order some from HF, but I'm pretty sure the Jet pulleys would be better.

 

[Monty]

Brad,
Give me the dimensions on the HF and I"ll compare with my Jet 1236 tonight.

 

[maxwell_smart007]

By Pulleys, do you mean the reeves drive?

 

[BradTheNailer]

By Pulleys, do you mean the reeves drive?

Yes, the Jet parts list refers to them as a "Spindle pulley".

Here is a link to the parts diagram of the 1236 http://woodworking.jettools.com/PartDetails.aspx?BDID=431

#12 and #29 ... they are split pulleys, but each come as a pair

 

[BradTheNailer]

Brad,
Give me the dimensions on the HF and I"ll compare with my Jet 1236 tonight.

Mannie,

On the Headstock pulleys (using a dial-caliper)

O.D. - 4.870 in.
I.D. - .940 in.
Depth - 2.00 in.
Both Keyed (.160 in.) outer pulley w/ set screw

Motor Pulleys
O.D. - 4.125 in.
I.D. - .630 in.
Depth - 2.750 in.
Both keyed (.160 in.) inner pulley w/ set screw

If you need a pic or two, let me know

 

[Monty]

Brad,
I'll check mine tonight and let you know.

 

[BradTheNailer]

Thanks!

 

[Monty]

The measurements for the Jet 1236 reeves drives are approximately:

On the Headstock pulleys (using a dial-caliper)

O.D. - 4.635 in.
I.D. - .925 in.
Depth - ??? in.
Both Keyed (.160 in.) outer pulley w/ set screw

Motor Pulleys
O.D. - 4.

110 in.
I.D. - .625 in.
Depth - ??? in.
Both keyed (.160 in.) inner pulley w/ set screw

 

[BradTheNailer]

Thanks Monty!