Jacobs Chuck

[Whaler]

Does anyone have a source for a high quality #2 MT Jacobs Chuck? The runout on all I have found is terrible.

 

[TellicoTurning]

Either I've been really lucky or else I don't know much about run-out, but I've two Jacobs chucks that I got from PSI and mine turn true... haven't seen any problem with them.... are you making sure the taper is seating cleanly?

 

[johnnycnc]

Does anyone have a source for a high quality #2 MT Jacobs Chuck? The runout on all I have found is terrible.

I don't want to sound like a salesman, but my storefront has some nice keyless chucks, 1/2" and 5/8".
http://penturnersproducts.com/index...Path=5&zenid=cf7ab3110419e7fc4c81be4a106d064b

I would even check the runout on one if you wish.

 

[hunter-27]

I don't want to sound like a salesman, but my storefront has some nice keyless chucks, 1/2" and 5/8".
http://penturnersproducts.com/index...Path=5&zenid=cf7ab3110419e7fc4c81be4a106d064b

I would even check the runout on one if you wish.

:wink:

 

[Whaler]

I don't want to sound like a salesman, but my storefront has some nice keyless chucks, 1/2" and 5/8".
http://penturnersproducts.com/index...Path=5&zenid=cf7ab3110419e7fc4c81be4a106d064b

I would even check the runout on one if you wish.

Thanks John. I just placed an order.

 

[Randy_]

I don't want to sound like a salesman, but my storefront has some nice keyless chucks, 1/2" and 5/8".
http://penturnersproducts.com/index...Path=5&zenid=cf7ab3110419e7fc4c81be4a106d064b

I would even check the runout on one if you wish.

Yes. Please do.