coastal scent size & color

Signed-In Members Don't See This Ad

immls

Member
Joined
Mar 28, 2011
Messages
17
Location
PA
I need a blank for a certain western PA football team. The black I figured out! the gold/yellow I'm not sure which would work. I've not had a lot of luck with black & yellow powder coating, or black and yellow PR dye. The black always turns the other color too dark.

Is the sample size enough to get a Wall St II blank from?

The advice I've gotten here on past posts has always been spot on -Thank You All
 
A sample would yield several blanks. If the black is bleeding I would use less black resin and more yellow so the black is not overpowering. Then let them gel a little more to prevent the bleeding/mixing.
 
I'm assuming you're trying to make blanks in Steelers colors. If you're wanting to go with straight mica use the black and cellini yellow from coastal scents. Might as well buy the 1oz of each. It'll last you a while. Let them both start to gel before mixing in your mold and you should get nice color seperation. It's a close match on the gold/yellow.
 
I'm assuming you're trying to make blanks in Steelers colors. If you're wanting to go with straight mica use the black and cellini yellow from coastal scents. Might as well buy the 1oz of each. It'll last you a while. Let them both start to gel before mixing in your mold and you should get nice color seperation. It's a close match on the gold/yellow.

Yup!!
 
Back
Top Bottom