Demonstration :)
- Thread starter vanagas
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
Hippie3180
Member
Nice! Did you use Acrylic or Alumilite?
ed4copies
Local Chapter Manager
Very NICE work!!
I tried dozens of times and never could get the inside scratch-free--CONGRATULATIONS!!
Yours looks superb!!
Ed
I tried dozens of times and never could get the inside scratch-free--CONGRATULATIONS!!
Yours looks superb!!
Ed
Same here.
Thank you Hippie. It is standard plexiglass material. For rings, I used epoxy resin. And wood, it is sandal tree.
Me also
I drove to İstanbul twice in two days because of it. I tried, tried and tried but it was not clean. Then I found another material as pipe, not stick. It was fitting perfectly to my design when I opened the threads. So I used them.Tony I advise you to use pipe. I couldn't do like you, then I found pipe, not stick. I just work on the top and in the end for threads.
jalbert
Member
I would suggest making the tenons on the end of the acrylic, rather than the wood finials, and drilling the corresponding holes for the tenons into the finials. That way you don't end up with the overlapping materials and glue lines visible.
Paul in OKC
Member
Nice!
BrilliantMe also